www.elect-mk.own0.com
Would you like to react to this message? Create an account in a few clicks or log in to continue.



 
HomeLatest imagesRegisterLog in

 

  Stair lighting timer

Go down 
AuthorMessage
amr mohamed
 
 
amr mohamed


Male
Libra
Dog
Occupation: : 369
Date of Birth : 1994-09-29
Join Date : 2010-11-12
Age : 29

   Stair lighting timer Empty
PostSubject: Stair lighting timer      Stair lighting timer I_icon_minitimeSun 27 Mar 2011, 8:18 am


Stair lighting timer



Project Description

Lamps Lighting temporary stairway (ladders)
Using the integrated circuit 555


   Stair lighting timer Minute10

Welcomed the electronic circuit

Before pressing any key: The lamp voltage is connected to the electricity network
Domestic as well as the adapter and the result, not bright lights and circuit Mstglp
This is required.
2 - Once you click on one of the keys BP (deployed along the route of the stairs)
Apply the current in the lamps illuminate, and the adapter Vigve irresistible provisional.
3 - When you have that intense resistance R1 and C3 have been able to generate a negative pulse rapid
At the entrance of the integrated 555 (Man 2)
The role of this pulse is to make the 555 born in the narrated three 12-volt pulse voltage almost
And
the duration of time of $ T: T = 1,1 RC and make the transistor T1 is
connected to Vicngl Alrelip Bdlk work offsetting the key that was
pressed before.
4 - the situation remains so even with the lifting of the pressure on
Key question, to be completed duration T.
At the end of the period turns off lights and cut off the power cord adapter, which also ensures
Non-functioning of the circuit, but when pressed again on the key of the keys to the stairs,
When the need arises ..
Example for the selection of period T: 100 Kilwaom resistance (0.1Mohm) and intensive 47 Mcrawfrad
The time limit is about 5 seconds ..
To facilitate the calculation: Balmicrawfrad intense resistance and turn to Almigaom
Mohm


Settings

Agenda in the selection of Assistant Duration
In seconds required to light the lamps stairs (from two minutes to 15 minutes)
The condenser is installed, the value of C = 1000μf/25v facilitate the task


   Stair lighting timer Temp1110

And by the way, the increase or decrease
In lamps or keys is possible. The number of keys is not necessarily
Equal to the number of lamps, but the number is chosen according to need or according to what is
Already exists in the building ..
Of course must be chosen governor of electric power cut proportionally with the number of lamps
Used (total amperes consumed)
For example: Governor (relais) equipped with a breaker with a carrying capacity equal to 10A .


cherry

Back to top Go down
https://elect-mk.own0.com
 
Stair lighting timer
Back to top 
Page 1 of 1
 Similar topics
-
»  Service Lighting Flip Flop bouncy
» Simple electronic circuit to control the lighting when it gets dark
» Simple circuit lights rotary Animated lighting
»  Dark auto lighting system
» Department of lighting the bulb of the phone line

Permissions in this forum:You cannot reply to topics in this forum
www.elect-mk.own0.com :: 
Department projects and electronic circuits
 :: 
Control lighting and motors
-
Jump to: