HomeCalendarSearchRegisterLog in

Share | 
 

 Stair lighting timer

View previous topic View next topic Go down 
AuthorMessage
amr mohamed
 
 


Male
Libra
Dog
Occupation: : 369
Date of Birth : 1994-09-29
Join Date : 2010-11-12
Age : 22

PostSubject: Stair lighting timer   Sat 02 Apr 2011, 8:56 am


Stair lighting timer




Explain the electronic circuit

1 -
Before pressing any key: The lamp voltage is connected to the electricity network
Domestic as well as the adapter and the result, not bright lights and circuit Mstglp
This is required.

2 - Once you click on one of the keys
BP (deployed along the route of the stairs)
Apply the current in the lamps illuminate, and the adapter Vigve irresistible provisional.

3 - When you have that intense
C3 and the resistance R1 have been able to generate a negative pulse rapid
At the entrance of the integrated 555 (Man 2)
The role of this pulse is to make the 555 born in the narrated three 12-volt pulse voltage almost
And
the duration of time of $ T: T = 1,1 RC and make the transistor T1 is
connected to Vicngl Alrelip Bdlk work offsetting the key that was
pressed before.

4-
the situation remains so even with the lifting of the pressure on
Key question, to be completed duration T.
At the end of the period turns off lights and cut off the power cord adapter, which also ensures
Non-functioning of the circuit, but when pressed again on the key of the keys to the stairs,
When the need arises ..
Example for the selection of period T: 100 Kilwaom resistance (0.1Mohm) and intensive 47 Mcrawfrad
The time limit is about 5 seconds ..
To facilitate the calculation: Balmicrawfrad intense resistance and turn to Almigaom Mohm


Settings

Agenda in the selection of Assistant Duration
In seconds required to light the lamps stairs (from two minutes to 15 minutes)
The condenser is installed, the value of C = 1000μf/25v facilitate the task




And by the way, the increase or decrease
In lamps or keys is possible. The number of keys is not necessarily
Equal to the number of lamps, but the number is chosen according to need or according towhat is
Already exists in the building ..
Of course must be chosen governor of electric power cut proportionally with the number oflamps
Used (total amperes consumed)
For example: Governor (relais) equipped with a breaker with a carrying capacity equal to
10A ..

cheers

Back to top Go down
View user profile http://elect-mk.own0.com
 
Stair lighting timer
View previous topic View next topic Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
www.elect-mk.own0.com :: 
Department projects and electronic circuits
 :: 
Timing and pulse circuits
-
Jump to: