HomeCalendarSearchRegisterLog in

Share | 
 

  Telephone line status

View previous topic View next topic Go down 
AuthorMessage
amr mohamed
 
 
avatar

Male
Libra
Dog
Occupation: : 369
Date of Birth : 1994-09-29
Join Date : 2010-11-12
Age : 23

PostSubject: Telephone line status   Sun 03 Apr 2011, 8:32 am


Telephone line status


Description of Service

Index case of the telephone line Telephone case indicator
You can use this control circuit devices and whether the line is busy or not


Explain the circuit

When you make a headset devices
Diode connected to the optical own light pointing to the use of the phone line by
That device.
Pena here if you use two phone and Dieudin optical stages can be repeated for more
So
Put this circuit in the control room where the wires are distributed to the rest room
Container on the subsidiary bodies.


Action

Allocated to each branch bridge determines the direction of the current calendar, which will pass through your phone
This section
When you pick up the phone in a Alfrat stream passes the limits of the range between -20 mA 50
mA Diode light gives light for this Alfrap
Working resistance 100 ohms to exceed all the current passing through the optical Aldieud 20
MA
You can use Dieudat optical diameters of 5 mm or 10 mm and color that you want -
Could indicate circuit status Alfrat in the case of a short or leakage across the line as a result of
Moisture or malfunction of the device is located in the Alfrap.

Illuminate all diodes light at incoming ring signal - to indicate that all devices
Receive the ring signal


Circuit diagram



Circuit elements

Qntrti unification of 1 amp or 4 Mouhdat 1N4001 or
1N4004 diode light (2) colors Mnkhtlven


.
cheers

Back to top Go down
View user profile http://elect-mk.own0.com
 
Telephone line status
View previous topic View next topic Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
www.elect-mk.own0.com :: 
Department projects and electronic circuits
 :: 
Telephone circuits
-
Jump to: